News

  • 0
  • 0

What is Silicon Nitride Si3N4 Powder?

Australian alumina ban disrupts Rusal Silicon Nitride powder prices for chemicals. Patel said. "One possible outcome could be Chinese buyers buying alumina and reselling it through eastern Russian ports." Rusal has a 20% stake in the Queensland Alumina Refinery, which has a capacity of 3.95 million tonnes a year, thus providing Rusal with 790,000 tonnes a year, Patel said. In addition, Rusal's Nikolaev refinery in Ukraine, which has an annual capacity of 1.75 million tonnes, has been suspended due to the conflict, he added. WoodMac said Rusal was also experiencing supply chain problems at its 2 million tonne a year Aughinish refinery in Ireland.

Introduction to Silicon Nitride Si3N4 Powder
Silicon nitride is a kind of inorganic substance, the chemical formula is Si3N4. The relative molecular mass is 140.28. Gray, white or off-white.
 

Physicochemical Properties of Silicon Nitride Si3N4 Powder
Si3N4 is a high-temperature insoluble compound. It has properties of high-temperature creep resistance. Hexagonal system. Crystals are hexahedral. The density of Si3N4 obtained by the reaction sintering method is 1.8-2.7 g/cm3, and the density of Si3N4 obtained by the hot-pressing method is 3.12-3.22 g/cm3. The Mohs hardness is 9~9.5, Vickers hardness is about 2200, and the microhardness is 32630MPa. The melting point is 1900 (under pressure). It usually decomposes at about 1900 at atmospheric pressure. Specific heat capacity is 0.71J/(g·K). The heat of formation is -751.57kJ/mol. The thermal conductivity is (2-155) W/(m·K). The linear expansion coefficient is 2.8~3.2×10-6/(20~1000). 
Insoluble in water. Soluble in hydrofluoric acid. The temperature at which oxidation begins in the air is 1300~1400. The specific volume resistance is 1.4×105 ·m at 20 and 4×108 ·m at 500. The elastic modulus is 28420~46060MPa. The compressive strength is 490MPa (reaction sintering). At 1285, it reacts with dicalcium diazide to form calcium diazide. At 600, the transition metal is reduced and nitrogen oxides are released. The bending strength is 147MPa. It can be made by heating silicon powder in nitrogen or reacting silicon halide with ammonia. The resistivity is between 10^15-10^16Ω.cm. It can be used as high-temperature ceramic material. 
Except for hydrofluoric acid and hot phosphoric acid, silicon nitride does not react with other inorganic acids and has strong corrosion resistance. 
 

Silicon Nitride Si3N4 Powder Properties
Other Names silicon (IV) nitride, α-Si3N4, SiN, trisilicon tetranitride, Si3N4 powder
CAS No. 12033-89-5
Compound Formula Si3N4
Molecular Weight 140.28
Appearance white to gray powder
Melting Point 1900°C
Boiling Point N/A
Density 2.2-3.5g/cm3
Solubility in H2O insoluble
Exact Mass 139.943

 

Silicon Nitride Si3N4 Powder CAS 12033-89-5
 

 
 

Applications of Silicon Nitride Si3N4 Powder
Silicon nitride ceramic material has the advantages of high thermal stability, high oxidation resistance, and high dimensional accuracy. Because the silicon nitride is the covalent compound with high bond strength, and it will form an oxide film in the air, it has good chemical stability. Silicon nitride is not oxidized below 1200, and a protective film can be formed at 1200~1600 to prevent it from further oxidation. Silicon nitride is not infiltrated or corroded by aluminum, lead, tin, silver, brass, nickel, and many other molten metals or alloys, but can be corroded by magnesium, nickel-chromium alloy, stainless steel, and other molten liquids.
Silicon nitride ceramic materials can be used in high-temperature engineering components, advanced refractory in the metallurgical industry, corrosion-resistant components and sealing components in the chemical industry, machining industry tools, and cutting tools.
Because silicon nitride can form a strong bond with silicon carbide, alumina, thorium dioxide, boron nitride, etc., it can be used as a bond material to modify with different proportions. 
In addition, silicon nitride can be used in solar cells. After the silicon nitride film is plated by the PECVD method, not only can it be used as an antireflection film to reduce the reflection of the incident light, but also, in the deposition process of a silicon nitride film, the hydrogen atom of the reaction product enters the silicon nitride film and silicon wafer, playing a role of passivation defect. The ratio of silicon nitride to silicon nitrogen atoms is not a strict 4:3, but fluctuates within a certain range according to different technological conditions. Different atomic ratios correspond to different physical properties of the film. 
Also, it can be used in ultra-high temperature gas turbines, aircraft engines, electric furnaces, etc. 
 

Main Supplier of Silicon Nitride Si3N4 Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality silicon nitride Si3N4 powder, please feel free to contact us and send an inquiry. ([email protected])

 

New Delhi: India is seeking to increase its purchases of crude oil from Brazil, the country's oil minister said recently after meeting his Brazilian counterpart.  

India is the world's third-largest importer and consumer of crude oil. Brazil currently supplies only a fraction of India's crude oil imports.  

India's state-owned companies Bharat Petroleum Corp and Oil and Natural Gas Corp have invested in oil and gas exploration in Brazil.  

India, which imports about 84% of its crude oil needs, is reducing its import bill by increasing biofuel use, among other things.  

India's state-owned fuel retailers are increasing ethanol storage capacity by 51 percent and the country plans to double the biofuel blend in petrol to 20 percent by 2025.  

India and Brazil are currently cooperating on biofuels and ethanol.

The prices of many commodities like the Silicon Nitride powder are expected to increase in the future.

Inquery us

Our Latest News

Erbium oxide Er2O3 powder properties

Erbium oxide Er2O3 powder is a pink powder with the chemical formula Er2O3, mainly used as an additive for yttrium iron garnet and a control material for nuclear reactors.…

What is the applicable scope of FeSi2 iron disilicide powder?

Iron disilicide is an inorganic silicon compound with a molecular formula of FeSi2 and a molecular weight of 119.975. It is a gray powder, odorless, tetragonal crystals. For hydrogen catalytic oxidation and methanation catalyst.…

Sodium Oleate Properties

Sodium oleate, also known as sodium octadecenoate, and sodium oleate are organic oils that can be used as emulsifiers. Sodium oleate is used in medicine.…