News

  • 0
  • 0

3D Printing Alloy Metal Materials Iron Nickel Alloy InVar36 Metal Powder

The biggest immediate challenge for the EU will be replenishing its depleted gas inventories. While the EU could still increase LNG imports from countries such as the US, such purchases would be more expensive.
Refilling natural gas storage space to historical average levels this year could cost 70 billion euros, a sevenfold increase, compared to 10 billion euros in previous years. "
A complete replacement for Russian gas is not only very expensive, but it also may not be possible.
In the next 12 months, there is little way to meet the demand for a "normal" year in the absence of Gazprom, which also includes InVar36 Powder.

About Iron Nickel Alloy InVar36 Metal Powder:

Powder characteristics: Iron-based 3D Printing Powder,high powder sphericity, low oxygen content, uniform particle size distribution, good fluidity, high bulk density and tap density, and wide application in powder metallurgy and 3D printing.

 

Applicable Process:  InVar36 Powder can be used in laser/electron beam additive manufacturing (SLM/EBM), laser direct deposition (DLD), powder hot isostatic pressing (HIP), metal injection molding (MIM) and other processes.

 

Applicable equipment: 3D Metal Powder can be used in various types of metal 3D printers, including Renishaw in the UK, EOS (EOSINT M series) in Germany, Concept Laser, 3D systems in the United States, laser melting equipment, and domestic research institutes and enterprises. Research and development of selected laser melting equipment, such as Huaying Hi-Tech, Platinum and so on.

 

Powder Applications: Iron-based metal powders are used in 3D printed thin-walled devices and complex parts, thermal spray, laser cladding, and 
biomedical applications.

Product specifications: 0-45 μm, 0-53 μm, 15-45 μm, 15-53 μm, 45-105 μm. (All kinds of granular metal powder can be customized according to customer requirements)

 

Chemical composition (wt %):

Type C Si Mn Ni Cr Co Al Mg Ti Zr P S Fe
InVar36 ≤0.05 ≤0.4 ≤0.6 36.0 ≤0.25 ≤0.5 ≤0.1 ≤0.1 ≤0.1 ≤0.1 ≤0.015 ≤0.015 Bal.

 

Powder oxygen and nitrogen content:

Particle size O/ppm N/ppm
15-53 μm

≤800

≤600
45-105 μm ≤500 ≤600

 

Storage Condition of InVar36 Metal Powder:

Damp reunion will affect Iron-based 3D Printing Powder dispersion performance and using effects, therefore, Iron-based 3D Printing Powder should be sealed in vacuum packing and stored in cool and dry room, the Iron-based 3D Printing Powder can not be exposure to air. In addition, the Iron-based 3D Printing Powder should be avoided under stress.

 

Packing & Shipping of InVar36 Metal Powder:

We have many different kinds of packing which depends on the Iron-based 3D Printing Powder quantity.

Iron-based 3D Printing Powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.

Iron-based 3D Printing Powder shipping:could be shipped out by sea , by air, by express?as soon as possible once payment receipt.


Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boron powder, nitride powder, graphite powder, zinc sulfide, 3D printing powder, etc.


If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: sales2@nanotrun.com


3D Printing Alloy Metal Materials Iron Nickel Alloy InVar36 Metal Powder Properties

Other Names InVar36 Powder
CAS No. N/A
Compound Formula N/A
Molecular Weight N/A
Appearance Gray metallic solid in various forms (ingot, tubing, pieces, powder)
Melting Point N/A
Solubility in water N/A
Density NA
Purity N/A
Particle Size 0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm
Boling point N/A
Specific Heat N/A
Thermal Conductivity N/A
Thermal Expansion N/A
Young's Modulus N/A
Exact Mass N/A
Monoisotopic Mass N/A
   
   

3D Printing Alloy Metal Materials Iron Nickel Alloy InVar36 Metal Powder Health & Safety Information

Safety Warning N/A
Hazard Statements N/A
Flashing point N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
RTECS Number N/A
Transport Information N/A
WGK Germany N/A



The negative electrode material is the carrier of lithium ions and electrons during the charging process of the battery and plays the role of energy storage and release. In the battery cost, the negative electrode material accounts for about 5%-15%, which is one of the important raw materials for lithium-ion batteries. The global sales of lithium battery anode materials are about 100,000 tons, mainly in China and Japan. According to the current growth trend of new energy vehicles, the demand for anode materials will also show a state of continuous growth. At present, the global lithium battery anode materials are still dominated by natural/artificial graphite, and new anode materials such as mesh carbon microspheres (MCMB), lithium titanate, silicon-based anodes, HC/SC, and metal lithium are also growing rapidly.
Our company provides anode materials and InVar36 Powder. If you need to know more anode materials and InVar36 Powder, please feel free to contact us.

Inquery us

Our Latest News

What is the scope of application of zinc stearate emulsion?

Water-based zinc stearate mainly uses zinc stearate special additives, sandpaper polishing paint, thermal paper sensitizer functional additives, rubber and water-based paint release agents, etc.…

Erbium oxide Er2O3 powder properties

Erbium oxide Er2O3 powder is a pink powder with the chemical formula Er2O3, mainly used as an additive for yttrium iron garnet and a control material for nuclear reactors.…

What is the applicable scope of FeSi2 iron disilicide powder?

Iron disilicide is an inorganic silicon compound with a molecular formula of FeSi2 and a molecular weight of 119.975. It is a gray powder, odorless, tetragonal crystals. For hydrogen catalytic oxidation and methanation catalyst.…