Answers

  • 0
  • 0

High Purity Silicon Boride SiB6 Powder CAS 12008-29-6, 99%

Recently, the EU proclaimed new sanctions on Russia, including coal, timber, rubber, cement, and fertilizer, as well as high-end seafood Silicon Boride.

CAS No. : 12008-29-6
EINECS No.: 234-535-8
Appearance: dark grey
Molecular Formula: SiB6
Molecular Weight: 92.952

About Silicon Boride SiB6 Powder:
Silicon boride (Silicon Hexaboride) is a shiny black-gray powder with a relative density of 3.0g/cm3 and a melting point of 2200°C. Silicon boride is a lightweight ceramic compound formed between silicon and boron. It is insoluble in water, resistant to oxidation, thermal shock, and chemical attack, especially with high strength and stability under thermal shock. The grinding efficiency is higher than that of boron carbide.
The SiB6 crystal structure includes interconnected icosahedrons (polyhedrons with 20 faces), icosahedral hexahedrons (polyhedrons with 26 faces), and isolated silicon and boron atoms. Compared to hexaboride, it is metastable. However, since crystal nucleation and growth are relatively easy, they can be prepared.
When heated in air or oxygen, the surface of SiB6 is oxidized, and it is attacked by boiling sulfuric acid and fluorine, chlorine and bromine at high temperatures. Silicon boride is conductive. The hexaboride has a low thermal expansion coefficient and a large nuclear cross-section for thermal neutrons. Feel free to send an inquiry to get the latest price if you would like to buy Silicon Boride SiB6 Powder in bulk.

Feature of Silicon Boride SiB6 Powder: 
1. Nano-silicon boride has high purity, small particle size distribution, high specific surface area.
2. The melting point up to 2230 °C. It can not be soluble in water and anti–oxidation and high resistance to chemical attack. especially in the high thermal impact and stability;
3. Grinding efficiency of silicon boride is higher than that of boron carbide, it can be used as abrasives, grinding and engineering ceramics such as nozzles, gas turbine blades and other different sintering conditions and sealing line

How is Silicon Boride SiB6 Powder produced?
A kind of step of preparing silicon boride powder is as follows:
Silicon powder with an average particle size of less than 1 micron and boron powder with an average particle size of fewer than 20 microns are mixed uniformly by a ceramic ball milling tank; the weight ratio of silicon powder and boron powder is 2.85-2.95:7.
After loading the crucible, put it into the gas protection furnace, pass in argon gas, and heat up to 1400-160 (TC, hold for 50-70 minutes;
At the beginning of heat preservation, put ASiCl4 into the furnace, 3-5ml per minute, dripping time 9-11 minutes;
After cooling, the final SiB6 powder product is obtained by crushing with a ceramic pot ball mill.

Application of Silicon Boride SiB6 Powder:
Main uses of silicon boride SiB6 Powder:
1. Used as various standard abrasives and grinding cemented carbides;
2. Used as engineering ceramic materials, as various standard abrasives, and grinding cemented carbide.
3. It is also used as engineering ceramic materials, sandblasting nozzles, and manufacturing blades of gas engines and other special-shaped sintered parts and seals.
4. Used as an anti-oxidant for refractory materials.

Storage Condition of Silicon Boride SiB6 Powder:
The damp reunion will affect SiB6 powder dispersion performance and using effects, therefore, silicon boride SiB6 powder should be sealed in vacuum packing and stored in cool and dry room, the silicon boride SiB6 powder can not be exposure to air. In addition, the SiB6 powder should be avoided under stress.

Packing & Shipping of Silicon Boride SiB6 Powder:
We have many different kinds of packing which depend on the silicon boride SiB6 powder quantity.
Silicon boride SiB6 powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Silicon boride SiB6 powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.


Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.

 

If you are looking for silicon boride, please feel free to contact us and send an inquiry, email address: sales3@nanotrun.com


Silicon Boride Properties

Other Names silicon hexaboride, SiB6 powder
CAS No. 12008-29-6
Compound Formula SiB6
Molecular Weight 92.9515
Appearance Dark Grey to Black Powder
Melting Point 1950
Boiling Point N/A
Density 2.43 g/cm3
Solubility in H2O Insoluble
Exact Mass 93.036391
   
   

Silicon Boride Health & Safety Information

Signal Word Warning
Hazard Statements H315-H319-H335
Hazard Codes Xi
Risk Codes 36/37/38
Safety Statements 26-36
Transport Information N/A

Inflationary pressures on Canadians continue to rise. The consumer-price index rose 6.7% in March from a year earlier, the biggest increase since January 1991, according to the latest figures from Statistics Canada.  

On a month-on-month basis, Canada's CPI rose 1.4 percent in March, also accelerating from February's 1.0 percent rise.  

Prices in the eight major sectors covered by the statistics continued to rise. The uptrend comes against the backdrop of continued price pressures in the Canadian housing market, widespread supply chain constraints, and geopolitical conflicts, according to CBC. A variety of factors have affected energy, commodity, and agricultural markets. Meanwhile, Canada's employment picture continued to improve in March, with the unemployment rate falling to a record low and the average hourly earnings of employees rising.  

Excluding gasoline, Canada's CPI rose 5.5 percent year on year in March.  It is also the highest since comparable data began in 1999.  

The widespread supply chain constraints and geopolitical conflicts are expected to continue to affect the prices of the Silicon Boride.

Inquery us

Our Latest Answers

Function and overview of titanium carbide TiC powder

Titanium carbide TiC powder is a crystalline solid with gray metallic luster, hard quality, second only to diamond in hardness, and weaker in magnetic properties. For the manufacture of cemented carbide, also used as electrodes and abrasives for arc…

Characteristics of calcium silicide CaSi2 powder

Calcium silicide is used in the manufacture of special metal alloys, for example for phosphorus removal and as a deoxidizer. Calcium silicide is used in the manufacture of special metal alloys, for example for phosphorus removal and as a deoxidizer.…

How is Niobium Carbide NbC powder produced?

Niobium carbide (NBC and Nb2C) is a very hard refractory ceramic material, widely used in refractory high temperature materials and cemented carbide additives.…